Model Number

BAY51-Q

Application

Can be applied in chemical plant, Storage, service station, well platform, oil producing and smeltering factory, and other spots. They are often used to illuminate workshop and working site.

1、Can be applied in explosive gas mixture with temperature class: T1～T6

2、Can be applied in explosive gas mixture area: Zone 1, Zone 2

3、Can be applied in explosive gas mixture with hazardous category: ⅡA,ⅡB,IIC

Model implication

BAY 51 - Q □×□ □ □

J: common emergency (not required, not noted)

L: Pole mounting

Mounting method

B: Wall mounting

D: Pendant chain mounting

X: Ceiling mounting

Lamp tube Nos.

Single tube power

Full-plastic

Design code no.

Explosion-proof fluorescent lamps

Technical data

 Rated voltage                        AC220V

 Ex-mark                            ExedmⅡCT6 / DIP A20 TA,T6

 Degree of protection                   IP65

 Dgree of corrosion-proof               WF2

 Available cable outer diameter           Φ10-14mm

Lamp wattage                        18（20）W×1  18W×2    36（40）W×1  36W×2 

Explosion protection to    GB3836.1-2000、GB3836.2-2000 、GB3836.3-2000、GB3836.9-2000

Features

1、    The product is combined type explosion-proof structure. Main enclosure is increased safety type，built-in electrical components are flame-proof type, built-in electronic ballast is powder filling type. It has reliable explosion-proof performance and strong protection capability.

2、    Transparency Cover is made of shock-proof polycarbonate material with high light transmittance and ultraviolet aging resistance function.

3、    The enclosure is made of glass-fiber reinforced unsaturated polyester resin, which can resist deforming and aging efficiently.

4、    Built-in special explosion proof electronic ballast with functions of short circuit and open circuit protection.defending circuit is desigened for tube aging effect and leakage phenomenon to assure lamp normal work.with effective energy-saving effect cosф≥0.95. large input range,lamp works well with stable power output in the range of 170V~250V.

5、  It adopts two-way clamping device with self-locking function on enclosure and transparent cover, which can be unlock or lock by a special purpose key.

6、The lamp has built-in isolating switch which can cut off power supply when opening transparent cover. Emergency function can be customized.

7、For lamp with emergency device for 90mins lighting,two types can be selected:one type is emergency device built inside lamp body,the other type is emergency built in special shell outside lamp,connected to lamp end.built outside emergency device with functions of charge,recharge and matter indicating etc. test buttons are convenient for overhauling.